Warehouse Services
Racking Inspections
Expert Warehouse Racking Inspections by SEMA-Approved Racking Inspectors
✅ SEMA Approved Racking Inspectors
✅ Detailed Inspection Reports & RAG Classification
✅ 20+ Years Family-Run Experience
✅ UK-Wide Coverage • Competitive Prices
Call 07947 886161 or 07917 664940 – Fast Response Within 24 Hour
Book Your Racking Inspection Today
Professional Warehouse Racking Inspections by SEMA Approved Racking Inspectors
A-Z Storage Systems works in partnership with A-Z Rack Inspections Ltd to provide professional warehouse racking inspections across the UK, carried out by SEMA Approved Racking Inspectors (SARIs).
Regular racking inspections help identify damage, deterioration, unsafe conditions and other issues that could affect the safe use of your warehouse storage equipment.
Our detailed inspection reports identify damaged components, record their locations, classify damage using the SEMA Red, Amber and Green (RAG) system, and provide clear recommendations for any remedial action required.
Contact us today to discuss your warehouse requirements or arrange a free consultation.
Why Are Racking Inspections Important?
Warehouse racking is exposed to daily loading, unloading, forklift movements and accidental impacts. Even relatively minor damage can affect the condition and performance of a storage system.
A professional racking inspection can help businesses:
Identify damaged racking components
Assess the condition of storage equipment
Identify potential safety concerns
Prioritise remedial work
Maintain inspection and maintenance records
Support ongoing warehouse safety management
Reduce the risk of damage being left unresolved
HSE guidance recommends that storage equipment is inspected regularly and that an expert inspection is carried out by a technically competent person at intervals of no more than 12 months.
SEMA also recommends a structured inspection approach involving regular visual checks and expert inspections by suitably qualified professionals.
SEMA Approved Racking Inspectors (SARIs)
Our sister company, A-Z Rack Inspections Ltd, provides inspections through SEMA Approved Racking Inspectors (SARIs).
A SARI is an individual who has completed SEMA's specialist training and assessment process for inspecting storage equipment. SEMA states that SARIs are trained and assessed in practical and cognitive skills and must maintain their competence through ongoing CPD.
This provides businesses with access to appropriately qualified inspectors who can assess warehouse racking and provide a detailed written report.
Important: A-Z Storage Systems does not describe the inspection itself as a "SEMA Approved Inspection". The inspector is SEMA Approved.
Step 1 – Arrange Your Inspection
Contact A-Z Storage Systems or A-Z Rack Inspections Ltd to arrange your warehouse racking inspection.
We will discuss your requirements and arrange a suitable inspection date.
Step 2 – On-Site Inspection
A SEMA Approved Racking Inspector (SARI) attends your warehouse and carries out a detailed inspection of the storage equipment.
Step 3 – Detailed Report & Recommendations
You receive a clear report outlining the findings, RAG classifications and recommended remedial actions.
Step 4 – Follow-Up Support
Where repairs or replacement components are required, A-Z Storage Systems can provide a separate quotation for the necessary remedial work.
Our Racking Inspection Process
What Does a Racking Inspection Include?
Our warehouse racking inspections assess the condition and suitability of the storage equipment and identify visible damage or other issues requiring attention.
Depending on the installation, the inspection can include:
Racking frames and uprights
Horizontal and diagonal bracing
Beams and beam connections
Beam safety locks
Baseplates
Floor fixings
Rack protection
Load notices
Visible corrosion or deterioration
Damaged or missing components
Storage configuration
General condition of the installation
Other visible safety concerns
The inspection findings are documented and clearly referenced within the report.
Detailed Racking Inspection Reports
Following the inspection, you receive a detailed written report designed to make the findings clear and actionable.
Reports can include:
Photographic evidence
Rack and bay references
Description of identified damage
RAG risk classification
Remedial recommendations
Location of individual issues
Prioritisation of required action
SEMA explains that an expert inspection report should identify damage and provide recommendations for any necessary remedial action.
This gives warehouse managers a clear record of the condition of their racking and the actions that may be required.
Racking Inspection RAG System
We use the recognised Red, Amber and Green risk classification system to help clearly communicate the severity of identified damage.
🔴 Red Risk
Serious damage requiring immediate action. The affected area should be taken out of use and appropriate controls introduced until remedial action has been completed.
🟠 Amber Risk
Damage requiring remedial action within a defined timescale. SEMA's guidance explains that Amber damage should be repaired within the specified period, otherwise it can become Red risk.
🟢 Green Risk
Damage or issues within the applicable acceptable limits but which should still be recorded and monitored through ongoing inspections.
The RAG system helps businesses understand which issues require the greatest priority.
Why Choose Our Sister Company A-Z Rack Inspections for Your Racking Inspections?
SEMA-Approved Rack Inspectors (SARIs)
All inspections are carried out by fully qualified, SEMA-trained and registered inspectors – the recognised UK gold standard for competent, independent racking assessments.
Detailed Traffic-Light Reporting
Clear, actionable reports using SEMA colour-coding (Green = safe, Amber = monitor/repair, Red = immediate action) with photos, measurements, risk levels and prioritised recommendations.
Full HSE, PUWER & SEMA Compliance
Inspections follow the latest SEMA Codes of Practice, HSE HSG76 guidance and PUWER regulations – helping you demonstrate due diligence and avoid enforcement action.
Nationwide Service from Experienced base
Fast scheduling anywhere in the UK – from our Flintshire headquarters we serve Warrington, Liverpool, Manchester, Midlands, London and beyond with minimal disruption.
What Happens If Damage Is Found?
Finding damage does not automatically mean that an entire racking system needs replacing.
The inspection report identifies the individual issues requiring attention and helps you prioritise remedial work.
Depending on the findings, this may involve:
Replacing damaged beams
Replacing damaged uprights or frames
Replacing bracing
Replacing baseplates or floor fixings
Replacing beam safety locks
Installing or replacing rack protection
Correcting storage configurations
Replacing incorrect or damaged components
Carrying out racking alterations
A-Z Storage Systems can provide remedial repair and replacement work following an inspection where required.
Racking Inspections & HSG76
HSG76 Warehousing and Storage: A Guide to Health and Safety provides guidance on the safe management of warehouse storage systems.
SEMA's current guidance explains that HSG76 recommends a three-tier approach to racking inspection, including regular visual inspections and expert inspections by appropriately qualified individuals.
HSG76 is guidance rather than legislation itself, so we avoid describing an inspection as simply a legal requirement. Instead, we focus on helping businesses follow recognised good practice and maintain appropriate inspection arrangements.
Who Should Arrange a Racking Inspection?
Professional racking inspections are particularly important for businesses operating:
Warehouses
Distribution centres
Logistics facilities
Manufacturing sites
Engineering facilities
Retail warehouses
E-commerce operations
Wholesale businesses
Builders' merchants
Commercial storage facilities
Whether you operate a small warehouse or a large distribution facility, regular inspection of your storage equipment can help identify problems before they become more serious.
Racking Inspection & Repair – Complete Support
One of the advantages of working with both A-Z Rack Inspections Ltd and A-Z Storage Systems is that customers can access inspection and remedial support through closely connected specialist businesses.
A-Z Rack Inspections Ltd
Provides professional warehouse racking inspections through SEMA Approved Racking Inspectors.
A-Z Storage Systems Ltd
Can provide racking repairs, replacement components, alterations, protection, installations and wider warehouse storage solutions.
This means that once an inspection has identified remedial work, you can obtain a separate quotation for the required repairs without having to find another racking contractor.
Racking Repairs
Racking Installations
Can you inspect racking installed by another company?
Yes. The inspection service can be arranged for existing storage systems regardless of who originally supplied or installed the racking, subject to the inspector's competence for the equipment being assessed.
Can you repair damaged racking after an inspection?
Yes. Where remedial work is required, A-Z Storage Systems can provide a separate quotation for racking repairs, replacement components or alterations.
Do you provide racking inspections nationwide?
Yes. A-Z Rack Inspections Ltd provides racking inspection services across the UK.
Is a racking inspection a legal requirement?
Businesses have responsibilities to ensure work equipment is maintained and safe to use. HSG76 provides recognised guidance on warehouse storage safety and recommends regular inspections, including expert inspection by a technically competent person. We recommend that businesses establish an appropriate inspection regime based on their equipment, working environment and risk.
Racking Inspections Across the UK
A-Z Rack Inspections Ltd provides professional racking inspections throughout the UK.
We have particularly strong coverage across:
North Wales: Wrexham, Deeside, Flintshire, Mold and surrounding areas.
North West England: Chester, Warrington, Liverpool, Manchester and surrounding areas.
Midlands: Birmingham, Derby and surrounding areas.
We also undertake racking inspection projects throughout other areas of the UK.
Frequently Asked Questions
How often should warehouse racking be inspected?
HSE guidance recommends that expert inspections are carried out by a technically competent person at intervals of no more than 12 months. The appropriate inspection regime should also take account of the warehouse environment, operating conditions and risk.
What is a SEMA Approved Racking Inspector?
A SEMA Approved Racking Inspector, or SARI, is an individual who has completed SEMA's specialist training, examination and practical assessment for storage equipment inspections.
What is included in a racking inspection report?
Reports can include photographs, rack and bay references, identified damage, RAG classifications and recommendations for remedial action.
What happens if Red Risk damage is found?
Where serious damage is identified, the affected racking should be taken out of use and appropriate controls introduced until suitable remedial action has been completed.
Do you inspect pallet racking?
Yes. We provide professional pallet racking inspections for warehouses and other commercial storage environments.
© 2026 A-Z Storage Systems Ltd. All Rights Reserved
Registered Company Number: 5401502 • VAT Registered: GB 858 1232 21
Sitemap
Complete Warehouse Solutions
We offer a full range of racking products and services, with our expert team ready to help, including site visits to assess your exact requirements.
Head Office