Longspan Shelving


Longspan shelving is ideal for large bulky heavy items or where the requirement is for large storage capacity. The endless height/width/depth combinations enable an economical and efficient storage facility to be designed. Easy to assemble and to adjust the shelf levels allow the system to be adapted to any storage need.

Longspan shelving can carry a loads of up to 775Kgs per shelf dependant of the shelf width. This boltless system is an easy system to install and adjust. The uprights and beams are fully powder coated to give a hardwearing and durable finish. The standard bay is supplied with four shelves incl. top and bottom, protective feet, and weight loading labels.

It is available in six standard heights, six widths and six depths as follows;

Heights: 1830mm, 2134mm, 2440mm,

                3050mm, 3660mm & 4575mm

Widths:  914mm, 1220mm, 1525mm, 

               1830mm, 2134mm & 2440mm

Depths:  305mm, 455mm, 610mm,

                760mm, 915mm, & 1220mm

The system has unrestricted access to all sides with no bracing required.

Longspan Two Tier System 

This Two-Tier shelving installation is created from our Longspan shelving system to give an economical optimum shelving solution.

Galvanised Shelving 

A less expensive method of shelving an area is to use galvanised longspan shelving but using galvanised steel creates a hardwearing and corrosion resistant finish. However, the shelf load is limited to 250kgs UDL and there are a limited number of bay height, shelf widths and depths available as follows;

Heights: 1980mm, 2440mm
Widths: 1830mm, 2440mm
Depths: 455mm, 610mm, 915mm & 1220mm.

All shelves are adjustable. The shelving includes 15mm thick high density chipboard and plastic feet. It is also available with galvanised steel panels.

Accessories

                                                                       Tie Plates

Connects two bays together. 

Foot Plates 

Allows the bay to be fixed to the floor.

Wall Bracket

Allows the bay to be fixed to the wall.

Shelf Material

15mm thick high density chipboard.
This standard and most cost effective finish for our shortspan shelving system and suitable for most applications.

18mm thick high density melamine faced and edged chipboard.
A more aesthetic finish and is easy to wipe clean. However this comes at a slight premium.

Mesh shelf panel.Only available in 1830mm & 2440mm long and 610mm, 915mm & 1220mm deep. Allows airflow and sprinkler access.

Colour Options 

Orange beam/blue upright
Grey beam/blue upright
Blue beam/blue upright
Grey beam/grey upright

If you do not see the application you are looking for or need to talk in more detail about your particular storage problem then please contact us.

 A-Z Storage Systems Ltd                                                                   23 Colliery Green Drive, Neston, Cheshire. CH64 0UA.                 Tele: 0151 353 1365                                                                           Mobiile: 07917664940                                                                       E-mail: p_hills@hotmail.com

 

© Copyright A-Z Storage Systems Ltd